Hilway Direct Plus Matte cleaner-maintainer, 33.8 Ounce (1L)

Protect floor with acrylic coating while retaining natural appearance with all-in one floor finish and cleaner-maintainer, Hilway Direct Plus Matte, 1-Liter . Highlights the natural appearance of wood or stone look flooring with the capability to be used as a cleaner maintainer to increase time between strip and refinish procedures. Low luster PLUS MATTE minimizes the appearance of scuffs and scratches that tend to show up more on high-gloss flooring and is essential to reduce scratches that occur from daily traffic. Excellent for facilities that routinely clean and polish floors, including luxury vinyl flooring. Use with mop & bucket or autoscrub program for cleaning. Apply as floor finish with a microfiber mop pad. Rejuvenates floor appearance with each cleaning extending the life of the flooring finish to reduce the number of strip and refinish applications. Hilway Direct Plus Matte Finish-Cleaner/Maintainer delivers a true matte sheen. For Use On: sheet vinyl, LVT, VCT, rubber, linoleum, PVC, non-PVC floors, cork, marble, terrazzo, slate, concrete, quarry tile, and asphalt tile. Safety Data Sheet: Hilway Direct Plus Matte Floor Finish & Cleaner/Maintainer SDS Information Sheet: Hilway Direct Plus Matte Product Data Sheet Coverage: 350 to 500 sq ft per 1-liter (33.8 ounces) for initial application. Coverage rate may vary depending on porosity of flooring and site condition. A larger 1.33 gallon Plus Matte is available for larger flooring areas. Not intended for use in a spray-buff program. For spray buff flooring maintenance, use Hilway Direct Plus or Plus GLOSS . How to use Hilway Direct PLUS MATTE: Applying Initial floor finish: Sweep to lift dirt and debris. Damp mop to completely remove dust and small dirt particles. Clean floor with Hilway Direct Neutral Cleaner or Allsafe Stripper, diluted per label directions, or use cleaning product recommended by flooring manufacturer. Rinse after cleaning to ensure removal of all cleaning solution and dirt. If there is a factory or site-applied acrylic coating on the